Economy Slat Blinds EC 70 / EC 100

The Economy Slat Blinds EC 70 / EC 100 are a modern solution that is both low-cost and convenient. The simply designed slat blinds meet all requirements for modern sun shading and weather protection - without any superfluous and costly extras.

What makes Economy Slat Blinds EC 70 / EC 100 from Schenker Storen unique

  • Wide range of applications (e.g. administration buildings, schools, hospitals, single-family homes and apartment buildings)
  • Suited for new buildings and conversions
  • Flat slat shape provides good visibility and an aesthetic slat look
  • Small recess dimensions are possible thanks to the minimal package height
  • Very wind stable thanks to the flexibly shaped slats that cannot become permanently deformed
  • Maintenance-free and service-friendly
  • Filigree cable guides for an aesthetic facade appearance 

Construction highlights

  • High stability in the closed position thanks to special indentations in the guide cable
  • Mounting strap made of dirt-repellent, age-resistant polyester
  • Perfect slat guidance thanks to the plastic coated steel cables
  • Available with manual or motor drive

Options

  • Perforated slats also available (coverage of holes 5%, hole size 0.8 mm)
  • Convex venetian blind and insect screen combined with a space saving combined guide
  • Also available with sturdy lateral guide rails made of extruded aluminium profiles
  • Wireless radio controller
  • Electronic sun and wind activated control system
  • Service and maintenance-friendly design
Fachinformationen

Selection tool for slat blinds

1:1 Drawings of Economy slat blinds EC 70

5060
DWG DXF PDF
5061
DWG DXF PDF
5062
DWG DXF PDF
5063
DWG DXF PDF
5064
DWG DXF PDF
5065
DWG DXF PDF
5066
DWG DXF PDF
5067
DWG DXF PDF
5070
DWG DXF PDF
5071
DWG DXF PDF
5072
DWG DXF PDF
5073
DWG DXF PDF
5074
DWG DXF PDF
5075
DWG DXF PDF
5140
DWG DXF PDF
5141
DWG DXF PDF
5142
DWG DXF PDF
5143
DWG DXF PDF
5144
DWG DXF PDF
5145
DWG DXF PDF
5146
DWG DXF PDF
5147
DWG DXF PDF
5148
DWG DXF PDF

Tender text for Economy slat blinds EC 70

Economy slat blind EC 70

Drop consisting of flexible slats, 70 mm wide. Can be used for sun protection. Individually adjustable slat inclination.

Consisting of:

Supporting frame
Made from galvanised steel plate, closed at the top. Rockers, slotted pipe and limitation for upper and lower stops installed for manual operation.

Slats
Made from powder-coated aluminium, lowered in the closed and raised in the horizontal slat position. Slat colours from the Schenker colour range.

Guide cord
Made from Trevira, connected form-fit to the slat.

Lifting cord
Made from grey Terylene fibre with special finish resistant to abrasion, UV radiation, etc. (Xeno test).

Drop closure
Made from extruded aluminium profile, clear anodised, can be tilted with the complete drop.

Guides
Steel cable side guides, diameter 2.5 mm with plastic casing and spring pre-tensioning or lateral guides made from extruded aluminium profile, clear anodised, with noise-suppressing plastic inserts.

Drive
Manual drive using a maintenance-free, dust-protected gears with integrated brake, extendable, PVC-coated articulated crank.

Malax – the proven plastic seal! Sealing washer or insert available at extra cost.

Motor with one lower limit switch built into the support channel, together with plug-in connection (both parts). Blind motors may not be connected in parallel.

The electrical connections must be set up by the customer.

We provide no guarantee for any damage and subsequent damage to blind systems caused by controllers supplied by the customer!

1:1 Drawings of Economy slat blinds EC 100

5080
DWG DXF PDF
5081
DWG DXF PDF
5082
DWG DXF PDF
5083
DWG DXF PDF
5084
DWG DXF PDF
5085
DWG DXF PDF
5086
DWG DXF PDF
5087
DWG DXF PDF
5090
DWG DXF PDF
5091
DWG DXF PDF
5092
DWG DXF PDF
5093
DWG DXF PDF
5094
DWG DXF PDF
5095
DWG DXF PDF
5140
DWG DXF PDF
5141
DWG DXF PDF
5142
DWG DXF PDF
5143
DWG DXF PDF
5144
DWG DXF PDF
5145
DWG DXF PDF
5146
DWG DXF PDF
5147
DWG DXF PDF
5148
DWG DXF PDF

Tender text for Economy slat blinds EC 100

Economy slat blind EC 100

Drop consisting of flexible slats, 100 mm wide. Can be used for sun protection. Individually adjustable slat inclination.

Consisting of:

Supporting frame
Made from galvanised steel plate, closed at the top. Rockers, slotted pipe and limitation for upper and lower stops installed for manual operation.

Slats
Made from powder-coated aluminium, lowered in the closed and raised in the horizontal slat position. Slat colours from the Schenker colour range.

Guide cord
Made from Trevira, connected form-fit to the slat.

Lifting cord
Made from grey Terylene fibre with special finish resistant to abrasion, UV radiation, etc. (Xeno test).

Drop closure
Made from extruded aluminium profile, clear anodised, can be tilted with the complete drop.

Guides
Steel cable side guides, diameter 2.5 mm with plastic casing and spring pre-tensioning or lateral guides made from extruded aluminium profile, clear anodised, with noise-suppressing plastic inserts.

Drive
Manual drive using a maintenance-free, dust-protected gears with integrated brake, extendable, PVC-coated articulated crank.

Malax – the proven plastic seal! Sealing washer or insert available at extra cost.

Motor with one lower limit switch built into the support channel, together with plug-in connection (both parts). Blind motors may not be connected in parallel.

The electrical connections must be set up by the customer.

We provide no guarantee for any damage and subsequent damage to blind systems caused by controllers supplied by the customer!

Neue Suche